AQL OzoneNetwork 2.0.1 Settings Function

Graphics Configuration

The Graphics configuration is used to set up display graphics parameters. The graphics Ozone Upper Scale, Lower Scale and Ozone Unit can be changed to fit specified devices. The graph's Line or Points Color, Background Color, and Setpoints Line Color can also be changed. These settings are just for individual sensor views. To change any data, just scroll up or down the value. To change any color settings, just click the color field then choose a color from color chooser dialog, and confirm your selection.

The graph properties could also been changed by right click on graph, and select Reconfiguring to change the properties of the graph view temporarily. The default properties can set back by right click graph and select Reset. You'll find another function for the graph is Save as images.., which can save the graph as an image in jpg format.

Communication Port Settings

The PC serial comunication port can also be configured. However, usually just Port parameter need user to setup. The default Port is COM1. When you are using COM2 to comunicate with the network system, you need reconfigure it. Click Settings -> Com Port, then communication port setting dialog appear. Choose Port to be COM2, other setting should not be changed, otherwise may not working properly. Then click OK button to confirm your settings.